Anegre sliced veneer
 
 SLICED  VENEER GHANA Due   to   the   intensive   training   as   a   veneer merchant,   my   specialty   is   the   inspection and selection of sliced veneers. Here   I   have   particular   experience   in   the purchase   of   Khaya   Mahogany   as   well   as Anegre, Koto, Sapeli and Makore. In   the   past   I   have   worked   successfully with       companies       like       van       Hout, Finewoods and others.
In   Ghana   there   are   the   classical   wood types    such    as    Anegre,    Sapeli,    Khaya Mahogany,     Makore,     Koto,     Chenchen, Black Hyedua, Iroko etc.. For   sliced   veneer   I   can   offer   lengths   of max. 4,80m. For    peeled    veneer,    I    can    offer    you    all thicknesses   from   1.00   mm.   Lengths   up to   2.50   m   and   widths   up   to   1.70   m   are possible. Main   wood   species   is   Ceiba   /   Fromage   / Fuma
Some   types   of   wood   can   only   be   offered as veneer and others as sawn timber. As    a    rule,    sawn    timber    is    trimmed    in parallel    or    also    available    as    a    boules product, depending on the type of wood. I   can   also   offer   you   mouldings   or   finger- jointed wood.
      Figure and Pyramids Special exotic veneers such as figured Anegre, Sapeli, Makore or Black Hyedua occur every now and then. Because of our permanent presence in the factories, we have the best opportunities, beautiful trunks at once.  
In   cooperation   with   the   company Tsuman Sphon   /   Kaminski   Timber   &   Veneers   I can   offer   you   mainly   oak   as   well   as   ash or beech veneers. These   are   available   in   both   Rift   and   flat cut.
 

WOOD TRADE SLICED VENEER & LUMBER

Alpha Lignum connects wood products from Ghana and Ukraine to importers and end users all over the world. The most important partners were the van Hout Group when purchasing veneer and Holz Schnettler Soest and Great Seas, Quingdao when purchasing sawn timber.
Alpha Lignum

    sliced veneer UKRAINE

L U M B E R
© Lorem ipsum dolor sit Nulla in mollit pariatur in, est ut dolor eu eiusmod lorem
Made with MAGIX

WOOD TRADE

SLICED VENEER &

LUMBER

Alpha Lignum connects wood products from Ghana and Ukraine to importers and end users all over the world. The most important partners were the van Hout Group when purchasing veneer and Holz Schnettler Soest and Great Seas, Quingdao when purchasing sawn timber.
ALPHA LIGNUM
 SLICED  VENEER GHANA Due   to   the   intensive   training   as   a   veneer   merchant,   my   specialty   is the inspection and selection of sliced veneers. Here    I    have    particular    experience    in    the    purchase    of    Khaya Mahogany as well as Anegre, Koto, Sapeli and Makore. In   the   past   I   have   worked   successfully   with   companies   like   van   Hout, Finewoods and others.
In   Ghana   there   are   the   classical   wood   types   such   as Anegre,   Sapeli, Khaya   Mahogany,   Makore,   Koto,   Chenchen,   Black   Hyedua,   Iroko etc.. For sliced veneer I can offer lengths of max. 4,80m. For   peeled   veneer,   I   can   offer   you   all   thicknesses   from   1.00   mm. Lengths up to 2.50 m and widths up to 1.70 m are possible. Main wood species is Ceiba / Fromage / Fuma
      Figure and Pyramids Special exotic veneers such as figured Anegre, Sapeli, Makore or Black Hyedua occur every now and then. Because of our permanent presence in the factories, we have the best opportunities, beautiful trunks at once.  
      Figure and Pyramids Special exotic veneers such as figured Anegre, Sapeli, Makore or Black Hyedua occur every now and then. Because of our permanent presence in the factories, we have the best opportunities, beautiful trunks at once.  
In   cooperation   with   the   company Tsuman   Sphon   /   Kaminski Timber   & Veneers I can offer you mainly oak as well as ash or beech veneers. These are available in both Rift and flat cut.